Ribbon Button Headband
1. 3/16″ (or 5mm) headband, white
2. 3/16″ ribbon -1′, red
3. 1/2″ ribbon – 4″, red
4. 1/2″ 4-hole button – 3 white, 3 red
1. Hot glue gun (switch on about 15 minutes before your project starts)
Prepare the above materials (add or change color to your own taste) & tools.
Mark lightly the point that you want the ribbon to end. Mark the same on the other side and make sure they are at the same level.
I did mine at 3″ from bottom.
Check if your hot glue gun is ready by inserting the glue tube into it, press the trigger a few times until a smooth flow of glue gets out from the tip. If you find that it is difficult to press the trigger or the glue appear to be sticky, wait a few more minutes for the gun to get hotter.
Dip a few drops of glue on the top of the headband, quickly attach the ribbon onto it, press until it stick well.
Do a few drops at a time since the glue gets harden pretty fast.
Try this tutorial with ruffled lace, add ribbon, button and sequin strip for more layers of decoration.
Or make this simple headband with mini ric rac.