Quilted Oven Mitt
To make: 1
Pattern: Download here, enlarge to suit your hand if require.
Remark: Seam allowance 1/4″, not included in the pattern.
1. Fabric (Christmas Prints) – 3 x Fat Eight in at least 3 colors
2. Fabric (backing/white) – Fat Quarter, 1 pc
3. Batting – thick or come with heat insulation.
4. Twill tape, 1″ width, 1 yard
5. Letter size paper
1. Sewing machine with appropriate presser foot
2. Erasable fabric marker
3. Ruler & Roller Cutter
4. Tube turning tool
Dimension: approximate 6 1/2″ (widest part) x 10″ (longest part)
Click image to get the pdf pattern or you can draw your own oven mitt from your exiting mitten.
Print out the pattern and check the mitten size by putting your palm onto the pattern, enlarge pattern is necessary to suit your hand.
Cut paper pattern and set aside.
Piece up some 9-patch quilt block, tutorial here, and cut some fabrics same size as the 9-patch square. I am using 9 pieces of 9-patch and 10 pieces plain squares. If your mitten is bigger, please prepare more.
a = finished width of smaller square, 1″
A = finished width of bigger square = 3a = 3″
1. Arrange the squares and quilt blocks in to double 9-patch quilt block, taking account of the 1/4″ seam allowance.
2. Place the mitten paper pattern on top of the assembly to check if it is big enough. Otherwise, add more patches to make up the size.
3. Patch up the squares by sewing them into rows, then sew them into 1 piece by rows. Press flat with iron.
4. Draw quilting lines on the patchwork.
5. Put a white backing at the bottom, follow by the batting then place the patchwork on top of them. Pin them up.
6. Stitch in the ditch between the bigger squares, then sew diagonally in both directions of the squares.
7. Cut fabric, batting and backing white fabric, rectangle shape, about 2″ bigger than the mitten’s pattern. Draw 45° angle lines with erasable fabric marker for quilting. Sandwich the batting between the fabrics.
8. Quilt with walking foot and a space guide of 1″ to make a square stitches in diagonal direction.
Trace the oven mitt pattern onto the wrong side of the double 9-patch piece. Depending on which side you want the double 9-patch quilt to show, flip the pattern according to your preferred side.
Sew around the pattern except the wrist portion.
Trim away extra fabric and leave 1/4″ seam allowance.
Make a clip on the curve at the seam allowance between the valley of thumb and fingers. This allows the curve to stretch and thus smooth out the when you turn the mitt to the right side.
Bind the raw edges with twill tape, either hand sticth or machine sew to the seam lines.
To make a hanging loop for the oven mitt:
1. Take a piece of stash fabric and cut it to 1 1/4″ wide and 5 1/2″ long.
2. Fold it into halve lengthwise, sew lengthwise with 1/4″ seam allowance.
3. Turn the tube right side out with the tube turning tool. Press flat along the seam line.
Fold the tube into halve and pin it on the side of the oven mitten to become the hanging loop.
To make the binder for the wrist, cut a piece of fabric 2 1/2″ wide and about 12″ long (at least 1/2″ longer than the mitt’s wrist). Fold into half lengthwise, iron flat.
Pin the binder with raw edges aligned. The ends meet at the side seam of the oven mitt; opposite side of the hanging loop so that the seam is not so bulky. Pin.
Sew with 1/4″ allowance start from about 1 1/2″ from the binder end (black arrow) and finish off about the same length from the other binder end.
Mark the side seam position of the binder and stitch the ends up (white arrow).
Go back to the wrist and complete the sewing of the binder to the oven mitt.
Fold the binder over to the inside of the oven mitt, stitch the fold edge along the stitching line. You may use machine stitch but I prefer hand stitch.
Turn the oven mitt right side out, smooth out the seam lines. The Christmas oven mitt is ready to serve some freshly baked cookies and cakes from the oven.
Hmmm… I smell cinnamon, berries, clove, peppermint, buttery cookies, fruit cakes, gingerbread, roasted turkey….. yum yum!!!