DIY Easter Eggs
Sakura Easter Eggs
Materials & Tools:
1. Plastic eggs
3. Flower sequins, pink
4. Quick dry all-purpose adhesive (clear color), for example, UHU.
5. Marker pen
6. Acrylic paint, metallic bronze and gold
7. Fine tip brush
8. Tweezers, sharp point
10. Newspaper to protect your working table and fabric scraps to for cleaning up.
Gather all the craft supplies you need for this project as listed in above.
Wash and dry the plastic eggs to remove any traces of oil and dirt on the surface. If the eggs are made up of 2 parts, split them open so that they are easier to dry.
Squeeze some quick dry all-purpose adhesive at the bottom of the egg. The glue gets tacky and dries up pretty fast, so make sure you work on a small area at a time.
Pinch the yarn end with the tweezers and glue it to the center.
Twist the tweezers to roll up the yarn a little with the yarn still in contact with the glue.
When the adhesion gets tacky, remove the tweezers and press the yarn with the back of the tweezers so that it is glued properly on the egg.
Wind the yarn around. Watch the alignment closely so that the winding won’t slant to other direction.
Glue and wind the yarn closely. If you find that your alignment is out, adjust it by pushing the yarn at that area with tweezers before the adhesive dries up.
Apply adhesive about 1/4″ high at a time during the winding.
If you eggs is horizontal-split, glue the top shell to it once you are almost finish winding the bottom shell.
Continue with the yarn winding.
As you are working upwards, the yarn tends to deviate further up during the winding. Don’t wind the yarn too hard, the tension should be just nice so that the yarn sit on top of the round just below it.
Cut the yarn as you are reaching the tip of the egg.
Apply glue at the tip of the egg, roll the yarn end with the tweezers and glue it on.
Repeat the winding on the other eggs while waiting for the glue to dry so that it is safe to work on for the next process.
Sketch out the branches of a tree on the egg, front and back, with marker pen.
Trace the line with metallic bronze acrylic paint by using a fine tip brush.
Highlight it with metallic gold. Repeat on the other eggs.
Pick a flower sequin with tweezers and glue it on the egg. Repeat.
Let the eggs dry completely for a few hours before starting to decorate with them.
Let the Easter Egg hunting begins with a mini bunny sachet next to it.