1. 6 yards of poly jersey interlock, cut 5 yards into 3/4″ strips along the warp direction to get 5 yards long for each strip. Join the strips and roll it into a ball of jersey yarn. As an alternative, you can also use T-shirt yarn that you recycle from T-shirt or bed sheet or new fabric. (Click here to see how to join strip, you have to scroll down to the middle of that post a little to reach the instruction.)
2. Reserve 1 yard for handles and wrappers.
3. Chrome plated ring (2″ dia) – 4 pcs. You can substitute them with other materials or shapes.
4. 5mm crochet hook.
1. Quilt quality fabric – 1/2 yard (enough for lining and pockets)
2. Interfacing – 1/2 yard
3. Zipper – minimum 12″
4. Nylon or strong thread
5. Sewing essentials
CROCHET SHAGGY BAG
Measurement (excluding handle): 12 1/2″ (W) x 8 1/2″ (H) x 2 1/2″ (D)
ch = chain
LS = loop stitch
sc = single crochet
ec = each
sl st = slip stitch
fo = fasten off
Starting chain: Chain 41
Round 1: Sc in 2nd ch from hook, sc in back loop only of next 39 ch; 3 sc in last ch, rotate (don’t turn) and continue along other side of the foundation ch, sc in remaining loop of ea of next 38 ch, 2 sc in last ch of this round, sl st to first ch. (82 sc)
Round 2: Ch 1, 2 sc in the first sc, sc in ea of next 38 sc, 2 sc in ea of next 3 sc, sc in ea of next 38 sc, 2 sc in ea of next 2 sc. Join with a sl st to first ch. (88 sc)
Body (1 round has 88 sc)
Round 3: Ch1, LS in ea sc, around, sl st to first chain. The loops are about 2″ long, use finger to gauge the length.
Round 4: Ch1, sc in ea sc, around, sl st to first chain.
Round 5 – 22: Repeat round 3 and round 4 another 9 times.
Attaching ring to the bag See below first 2 pictures.
Round 23 – Ch1, sc in ea sc of next 5 sc, [ring 1]*pass strip through the ring, sc* repeat 5 times, sc in ea of next 20 sc, [ring 2]*pass strip through the ring, sc* repeat 5 times, sc in ea of next 14 sc, [ring 3]*pass strip through the ring, sc* repeat 5 times, sc in ea of next 20 sc, [ring 4]*pass strip through the ring, sc* repeat 5 times, sc in ea of next 9 sc, sl st to first chain.
Round 24- Ch1, sc in ea sc, around, sl st to first chain. Fo. Hide ends.
Cut the reserved 1-yard poly jersey interlock into 6″ wide along warp direction, 6 pcs of them.
Fold them into halve (3″ wide), stack 3 of them and sew at 2″ from the edge at one end. Braid the strips until you get a length of 12″ long (braid more if you want a longer handle), arrange the ends nicely and sew. Cut the remaining length by leaving a 2″ allowance. You have a 2″straight, 12″ braided, and 2″ straight handle. Make 2.
Cut 2″ x 3.5″, 2 from jersey interlock, and 2 from lining fabric. Fold the 2″ side to about third to have a width of 3/4″, wrap around the sewn stitches of the handle. Begin at the center, sew a few stitches to attach 1 end of the wrapper to the handle. Sew along the center of the wrapper to the handle as you go round, avoid catching the wrapper’s front layer for aesthetic purpose. Till you come back and reach the start end, fold in the end (if your wrapper is too long cut the extra length before folding) and slip stitch at the center.
Measure the bag, I had 12.5″ W x 8.5″ H x 2.5″ D, if yours is different, adjust the measurement of the lining accordingly.
Cut the lining fabric (with seam allowance of 0.5″) to:
Width =0.5 + 12.5 + 2.5 + 0.5 = 16″, and
Length =0.5 + 1* + 8.5 + 2.5 + 8.5 + 1* +0.5 = 22.5″.
Top cover for zipper, D = 0.5 + 1 + 0.5 = 2″, W=16″, 2 pcs.
*The 1″ on the length is actually 2.5″ for the top of the bag, but since there is a zipper, I deducted 0.5″ away.
Iron the fusible interfacing to all the wrong side to make the bag lining more steady.
Attach zipper pocket 3.5″ from the top, 6-compartment slip pocket 7.5 from bottom
Sandwich the zipper in between the lining and top cover, with the right-side of the zipper facing the right side of the top cover. Sew.
Repeat the same to the other side of the zipper.
Top stitch a line 1″ from the zipper, this is the line where you are going to sew the lining to the shaggy bag.
Sew the sides. Flatten the corner into a triangle shape, sew at 2.5″ width between the 1″ line (this is the depth of the bag), clip off the corner. Repeat all 4 corners. Add a zipper stopper if you like.