Note Book Cover Sewing Pattern
1. Main Cover Fabric = 22 3/4″ x 9 3/4″
2. Side Lining = 5 1/2″ x 9 3/4″ (2 pcs.)
3. Center Lining = 13 1/4″ x 9 3/4″
4. Batting (5mm loft) = 12 3/4″ x 8 3/4″
5. Rigid Fusible Interfacing = 4 1/2″ x 8 3/4″ (2 pcs.), 12 1/4″ x 8 1/2″
6. Ribbon = 15″
7. Appliques fabric = Floral, brown, alphabet
8. Embroidery flosses
9. Sewable magnetic button (1 pair)
10. Decorative button
11. A5 Note Book: 12 1/4″ around (including the binder), 8 1/4″ height
1. Sewing essential
2. Sewing Machine
4. Water erasable pen
Click the picture to download the pattern. Print it in letter size paper, don’t scale. Enlarge according to the pattern for page 2-4.
If your notebook is not in A5 size, measure the width (around) and height:
1. Add 9 1/2″ to the width for the main fabric,
2. Add 1/2″ of the all the height, except center lining 1/4″.
Cut all materials according to patterns and seam allowances. No seam allowance for fusible interfacing and batting.
Baste batting to the wrong side of the center part of the main cover.
Embellish and embroidery the appliques and patterns onto the cover.
Make a few embossing hearts at the back cover if you like.
Needle turn and slip stitch the floral heart applique with hand, then top stitch the center with sewing machine.
Embroidery the wording by using branch stitch.
Sew the smaller heart by using a sewing machine.
To make the burnt effect of the letter applique, cut a slightly bigger square of an alphabet fabric, burnt the edges with tea-light candle until it reaches the shape you want. Sew it on the front cover with sewing machine.
Hide thread ends by pulling both front thread ends to the wrong side of the stitch, tie them up and trim the ends.
This will ensure the threads won’t come off and stick out to the front.
Fold the top and bottom edges of the pen holder to the center, sew a zigzag stitch along. Topstitch near the edges.
Sew the sides together, turn, sew it on the Pen Holder markers.
With right side facing each other, sew around the fastener, leaving an opening on the straight vertical edge. Clip curve. Turn and fold in the seam allowance of the opening. Topstitch around and sew 1/2″ length to the Fastener markers on the cover.
Sew on magnetic button and decorative button.
Iron rigid fusible interfacing to the wrong side of the left and right of the main cover.
With right side facing each other, sew side linings to the main cover.
Clip corner, turn. Adjust corner and press.
Press top & bottom edge of the cover & baste them in place.
Sew pocket in place.
Baste bookmark ribbon to the right of the center (with the wrong side of the cover facing you).
Iron rigid fusible interfacing to the center lining, fold top and bottom edges in and press.
Place the center lining on top of the wrong side of the cover. Pin to secure.
Since the center part of the cover is bigger than the center lining, align the side edges and leave extra space on the center to account for the fold of the note book.
Flip the left and right side lining onto it. Sew along the red lines.
Close the note book and check for the fitting. Just in case it is a little too tight, trim the edges of the note book to make them fit better.
Mine fitted very well, no modification was needed.
Insert a pen into the pen holder. Check for the position to sew the other pair of of the magnetic button.